The M-7017 is an analog input module that provides 8 differential input channels. The input type includes both voltage and current, and all channels are available for the same input range. An optional external 125 Ω resistor is required for current input. The modules also feature 3000 VDC intra-module isolation as well as ±120 VDC overvoltage protection. The M-7017 supports Modbus RTU and DCON protocols, which can be configured via software, and only provides differential analog input channels. Other hardware specifications are the same as the I-7017.
| Model |
Analog Input |
DIO |
| DCON |
DCON, Modbus/RTU |
Channels |
Resolution |
Sampling Rate |
Range |
Common Voltage Protection |
Channel Configurable |
Overvoltage |
| I-7012-G |
- |
1 diff. |
16-bit |
10 Hz |
±150 mV to ±10 V, ±20 mA |
±100 VDC |
- |
±120 VDC |
DIx1 / DOx2 |
| I-7012FD |
- |
1 diff. |
16-bit |
10/100 Hz |
±150 mV to ±10 V, ±20 mA |
±100 VDC |
- |
±120 VDC |
DIx1 / DOx2 |
| I-7014D |
- |
1 diff. |
16-bit |
10 Hz |
±150 mV to ±10 V, ±20 mA |
- |
- |
±15 VDC |
- |
| I-7017-G |
M-7017-G |
8 diff. |
16-bit |
10 Hz |
±150 mV to ±10 V, ±20 mA |
±15 VDC |
- |
±120 VDC |
- |
| I-7017C |
M-7017C-G |
8 diff. |
16-bit |
10 Hz |
0–20 mA, 4–20 mA |
±15 VDC |
- |
- |
- |
| I-7017F-G |
- |
8 diff. |
16-bit |
10/60 Hz |
±150 mV to ±10 V |
±15 VDC |
- |
±120 VDC |
- |
| I-7017R-G |
M-7017R-G |
8 diff. |
16-bit |
10/60 Hz |
±150 mV to ±10 V |
±200 VDC |
Yes |
±240 Vrms |
- |
| I-7017Z-G |
M-7017Z-G |
10 diff / 20 SE |
16-bit |
10/60 Hz |
Voltage & Current selectable |
±200 VDC |
Yes |
240 Vrms |
- |
| - |
M-7017mC-16-G |
16 diff/SE |
16-bit |
10/200 Hz |
0–20 mA, 4–20 mA |
25 VDC |
- |
±110 VDC |
Data Logger |
Notes:
- Need external 125 Ω resistors
- Supports DI / DO / Alarm modes
- Jumper selectable ranges
- Firmware-specific features apply
- Includes RMS and Data Logger variants
|
