PLC Based Automation Solutions and Communication System
+91 9152891323, 9819391323 / response@nimbustechnologies.ae
NSM-206AFCS-60T
NSM-206AFCS-60T
4-port 10/100 Mbps Ethernet with 2 fiber ports Switch (Single-mode 60 km, SC Connector)、Power Supply Input +12 VDC ~ +48 VDC with metal case
Features
- Redundant dual +12 ~ 48 VDC power inputs
- Single-mode, SC Connector Fiber supports
- Provides 2 x 100-FX fiber port plus 4 x Ethernet ports
- Broadcast Storm protection
- Introduction
- Application
- Specification
- Download
- Get A Quote
Introduction
The NSM-206AFCS-60T is a 4-port unmanaged Ethernet with 2 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NSM-206AFCS-60T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
| Model | Fiber | Ethernet | Operation Temp. | Power Input | |||||
|---|---|---|---|---|---|---|---|---|---|
| Plastic Casing | Metal Casing | Mode | Port | Speed | Distance | Port | Speed | ||
| NS-206AFCS-T | NSM-206AFCS-T | Single-Mode | 2 x SC | 100 M | 30 km | 4 x RJ-45 | 10/100 M | -30 ~ +75°C | +12 ~ +48 VDC |
| NS-206AFCS-60T | NSM-206AFCS-60T | 60 km | |||||||
Application
Specification
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact |
| LED Indicators | |
|---|---|
| Status | PWR1, PWR2, PWR_Fault, Link/Act, 10/100M |
| Ethernet | |
|---|---|
| Ports | 4 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward |
| MAC Table | 2048 |
| Frame Buffer Memory | 1 Mbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| Fiber | |
|---|---|
| Ports | 2 x 100 Base-FX, SC connector |
| Mode | Single-Mode |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance | 60 km, (9/125 μm recommended) for full duplex |
| Wavelength | 1300 or 1310nm |
| TX Output | -5 dBm Min. 0 dBm Max. |
| RX Sensitivity | -35 dBm |
| RX Overload | -5 dBm |
| Budget | 30 dBm |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +12 ~ +48 VDC (Redundant input) |
| Redundant Power Inputs | Yes |
| Consumption | 0.14 A @ 24 VDC |
| Alarm Output | Yes, Relay 2 A @ 30 VDC |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) | 25 x 168 x 131 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Ingress Protection Rating | IP30 |
| Environment | |
|---|---|
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Download
